Easy Vape Digital V5 Vaporizer Instructions

1. Turn the Easy Vape Digital V5 Vaporizer on by pressing the power button.


2. Press MODE once to set the timer for shut off then press S to enter


3. Adjust temperature by pressing + or - then press S to Enter


4. Grind your blend with your Got Vape grinder, make sure your blend is ground up finely.


5. Grind up material and suck up into the tip of the glass hand piece. Recommended load is 1/3 or less of the bowl volume (from screen to tip) Tightly packed down.


6. Slide the Vapor Whip onto the heating element of the Easy Vape Digital V5 Vaporizer. For best results, let the vapor whip remain in place for 2 minutes before inhaling).


7. Exhale all of your breath and take a long steady inhalation, this will produce a visible vapor, try experimenting with longer or shorter inhalations. To adjust the density of the vapor, adjust the temperature gauge either up and down.


8. When removing the Vapor Whip from the heating element, the tip of the vapor whip will be extremely hot, please use caution and make sure you only come in contact with the base of the whip and do not come in contact within 1 inch of the tip of the vapor whip.

Repeat steps 5 & 6

Smoking Technique

The material can be packed down using the blunt end of a poker, a pen or a pencil. Over-packing reduces airflow and results in overcooked or burned materials.

Expel material by blowing whip into a bottle, can, or plastic container. If some material remains in the tip it may not be thoroughly cooked.

Moist material does not seem to work as efficiently, although it can work just fine.