Evolutions Vaporizer Instructions

Evolutions Vaporizer Important Operating Instructions

Below find step by step instructions on using the Evolutions Vaporizer v7.

1. Set operating temperature of controller to 380 degrees Fahrenheit by following these three steps:
   
   • Press the teal green “SEL” button ONCE. (note red light marked “SV” is on)
   • Press the up or down button until desired temperature is indicated
   • Optional: Press the green “SEL” button once more to Select your desired temperature.
     Note: if you do not do this the controller will do it for you in 30 seconds.
     
     
2. As far as temperature is concerned, a good starting point is 380 degrees, however, individual machines may operate well within the range of 360 to 430 deg.
   
   
3. There is a certain “new car” taste to a brand new vaporizer and if you see some vapor slowly waft from the heater port, don’t be alarmed, this is just dust, finger prints, and the corn oil we use in the machining process burning off.
   
   It smells and tastes weird but ususlly goes away within a few hours.
   
   If you are really worried about it you can turn your vaporizer all the way up to 500 degrees and let it go for 30 mins, that after that there won’t be a hint of flavor left when you turn it back down to 400.
   
   
4. Next, if you have not already done so, stretch one end of the silicone hose around the tube end of the bowl and the other end around the tube end of the provided mouthpiece. Eventually you may want to experiment with attaching the hose to one of any number of bag, ice, or water attachments.
   
   
5. Fill the bowl about half full and remember, the fluffier the material the thicker the vapor and the denser the material the longer the flavor and aroma will last.
   
   
6. Plug the bowl into the heater port on the vaporizer with a gentle twisting motionuntil the glass clears the lip of the silicone and fully seats.
   
   
7. Draw as much air as is comfortable to achieve desired vapor delivery.
   
   
8. The temperature of the material inside the receiver has everything to do with the amount of air being drawn through it. The more air that moves through the bowl, the closer its temperature will be to that indicated on the controller.
   
   
9. Conversely, if no more air is being drawn through the tobacco, it will cool back down to room temperature and wait for you to return.