Silver Surfer Vaporizer Instructions
Turn on SSV glass adjustment knob clockwise to the maximum setting.(equivalent to 207 degrees Celsius)
Let the Silver Surfer run at this level for 30 minutes. As this will burn off the manufactures packing oils on the ceramic heating element. Make sure you do this in a well ventilated area.
Turn back the knob about 1/3 turn depending on personal preference.
Grind Substance.
Pinch or scoop material into the tip/bowl of the glass hand-piece. Recommended load is 1/8 or less of bowl volume (from screen to tip)
Gently push the wand up to the hole on the glass heater, there should be a nice fit when the two pieces of glass come together. While holding the wand up to the glass heater, begin to inhale.
This will draw air into the heater and warm it up to vaporizing temperatures. The air passes through the plant matter and warms it up until essential oils are released as vapor.
Draw as much air as is comfortable to achieve desired vapor delivery.
Replace material as desired and repeat
|
