GotVape.com Top Rated Vaporizers on Sale Now!
The PALM Vaporizer is manufactured by VaporBLUNT Inc. in the United States.
Introduced to the market in 2012, the PALM Vaporizer is a direct application portable Vaporizer that can be used on the go for your daily activities and at any altitude.
Built with a durable polycarbonate outer shell, the PALM Vaporizer uses steel rods inside the ceramic heating chamber combined with a rechargeable NIMH battery to achieve the desired vaporization level.
Utilizing a compact design, the PALM Vaporizer measures only 4 3/8” (L) x 1 1/8” (W) x 11/2” (H) in size.
A unique replaceable screen and glass air path allows you to keep the PALM Vaporizer clean and performing at a maximum level time after time.
As an extra bonus, the PALM Vaporizer comes with both a standard and flavored tip mouthpiece, allowing you to switch between mouthpieces accordingly.
The PALM Vaporizer is easy to use: simply grind your blend to a fine consistency. Open the acrylic lid and place your material into the filling chamber. Close the lid, firmly press a freshly charged battery into the battery port, located underneath the PALM Vaporizer and start enjoying your vapor.
On average, one battery will support 30 minutes of continuous Vaporization. One load will provide between 4 to 8 draws, depending on your usage/taste preferences.
The nearly instant heat-up provides immediate vapor. You can prepare, use, and reload without having to wait.
The PALM Vaporizer has a rapid warm-up time of only 5-10 seconds once the nickel hybrid battery is inserted into the heating element.
The PALM Vaporizer is calibrated to be at 380 F within seconds after the unit is started. The temperature in the device is controlled by the draw rate/breath control. To achieve higher temperatures with your blend, draw very slowly.
By drawing directly from the PALM Vaporizer you will also be able to sense the temperature of the vapor stream as well as the taste. Simply remove the battery when you are finished taking a draw, otherwise the blend will get too hot.
At a temperature of 380 Degrees Fahrenheit, you must be careful on your application method and how long you keep the battery in the PALM Vaporizerto avoid overheating your blend.
Keeping the PALM Vaporizer clean is easy, use the cleaning brush to scrape the screen between uses and avoid residue build-up. You can also blow into the screen remove excess deposit. Wipe the acrylic lid (inside and out) as well as the glass air path of the PALM Vaporizer with a Got Vape Wipe.
Each PALM Vaporizer unit comes with a Lifetime manufacturer’s warranty that is restricted to normal use. The rechargeable nickel hybrid batteries are equipped with a 3 month warranty.
All to cool before touching, using the included cleaning brush, you can clean the screen. Use Got Vape Wipes to clean the ceramic heating chamber, screen, and glass air path. Do not use Got Vape Wipes or Alcohol on plastic parts as it will degrade the material.
When shopping at GotVape.com, rest assured you will be purchasing the highest quality products available.
The PALM Vaporizer is guaranteed to be free of manufacturing defects and in proper working condition when you receive your order.
Should your order arrive and the PALM Vaporizer is defective, a replacement will be provided free of charge. To obtain your replacement, contact GotVape.com within 7 days of receipt of your order.
GotVape.com provides you with top-rated vaporizer products, accessories, and replacement parts. Enhance your vaporization experience by making sure to clean your PALM Vaporizer on a regular basis after use.
This will help to ensure your PALM Vaporizer remains in proper working condition.
It seems as though you might be holding the battery too long inside the chamber connector.
During our testing process, a quality vapor is produced when pressing the battery in for 5-7 seconds only.
Please give our Customer Service Department at (888) 827-3101 so we can further assist you if this does not resolve your issue.
The PALM Vaporizer is similar to the Magic Flight Launch Box Vaporizer in the sense that it uses the same type of rechargeable batteries. However, the form factor of the PALM Vaporizer allows the battery to be placed underneath the body of the unit which is a unique feature.
Also, the screen on the PALM Vaporizer is replaceable while the body of the unit has a lifetime warranty just like the Magic Flight Launch Box Vaporizer. The PALM Vaporizer also comes equipped with both a standard and flavored mouthpiece.
Yes, the PALM Vaporizer is equipped with both a standard mouthpiece and a single VaporBLUNT Flavor Tips.
We recommend using the carrying pouch that is included when you purchase the PALM Vaporizer for an affordable rate.
The PALM Vaporizer uses Palm Vaporizer Screens so that you can change them at your discretion. On average, one screen should last between 6-8 months.
However, every individual is unique, so we have the Palm Vaporizer Screens available at an affordable rate.
The blinking Red light indicates that your PALM Vaporizer needs to be charged.
Once a full charge takes place, a Green Light is showcased on the PALM Vaporizer charger.
An average full charge takes around 2-3 hours, Please feel free to give our Customer Care Line a call at (888) 827-3101 for further assistance.
Is your PALM Vaporizer not heating up and producing any Vapor?
If so, we can certainly bring your unit in for testing and provide you with a Warranty unit if that is the case.
Please give our Customer Service Department a call at (888) 827-3101 so we can begin the process.
The PALM Vaporizer is a nice entry level portable unit, however, you must not keep the battery on for an extended period of time in order to avoid the potential of overheating.
The iolite Original Vaporizer is a great alternative because the built in temperature regulator consistently keeps the temperature at 374 Degrees F.
This means that you can have your blend inside the chamber for an extended period of time.
The PALM Vaporizer is simple to change the screens. Open the cap to reveal the filling chamber. Pull out the black frame that holds the screen in place. Remove the clips from the corners of the PALM Vaporizer. Your replacement screen will include new clips to secure your screen in place. Replace the frame and prepare for use.
This could be due to an initial charge time of up to 6 hours; the standard for NiMH batteries.
If your PALM Vaporizer has already gone through the full charging phase, this might be an issue with the charger.
Please give our customer care line a call at (888) 827-3101 so we can further assist you.
This indicates that there is an issue between the PALM Vaporizer charger and Palm Vaporizer Battery 2 pk.
Please give us a call at (888) 827-3101 so that we can further assist you and provide you with a remedy.
The PALM Vaporizer is designed for mainly dried blends, however there have been patrons who have tried concentrated essential oils, not liquid based.
If you are planning on trying concentrated essential oils or pollen, please keep in mind that you have to purchase new Palm Vaporizer Screens on a regular basis.
On the average, plan on changing the Palm Vaporizer Mesh Screens 2pk at least twice a year.
However, patrons that frequently use the PALM Vaporizer will replace their Palm Vaporizer Mesh Screens 2pk once a month.
Every individual is different, thus you certainly could use the same Palm Vaporizer Mesh Screens 2pk with proper cleaning.