The tubing is medical grade tubing, which does not have any harsh smell or lingering odors.

The whip comes with a 3ft of tubing that is in between that separates the glass pieces.

No, this particular whip is considered a one piece whip. This whip attaches directly up to the heating element.

We only offer this whip in a dark blue color, choosing alternate colors is not an available option at this time. We do apologize for the inconvenience.

No, unfortunately the glass bowl is only sold as a whole with the whip.

Good question, in order to line up the screen into the groove of the Ground Glass Joint, use a thin tool that is at least 5 inches in length to push out the old screen. I recommend using a 5 inch Got Vape Glass Poker, unfolded/straightened paper clip, BBQ Skewer, Bi-Focal Screw Driver, or the inside of a pen.

Insert the new screen with your pointer finger through the Ground Glass Joint so it rests inside the groove on the Ground Glass Vapor Whip 18mm. At the same time, insert the poker through the other end of the vapor wand where the tubing fits onto it, so it holds the screen in place while securing the screen into place with your finger.

Yes, you would need an 18mm Vapor Whip, this ground glass whip here will work for you.

Replace the screen inside of the Ground Glass Vapor Whip 18mm by using a thin tool that is at least 5 inches in length to push out the old screen. I recommend using a 5 inch Got Vape Glass Poker, unfolded/straightened paper clip, BBQ Skewer, Bi-Focal Screw Driver, or the inside of a pen. Insert the new screen with your pointer finger through the Ground Glass Joint so it rests inside the groove on the Ground Glass Vapor Whip 18mm. At the same time, insert the poker through the other end of the vapor wand to hold the screen in place while securing the screen in place with your finger.