WISPR by IOLITE Instructions

1.  Fill up the WISPR: Make sure the on/off switch is in the off position (no red) before filling. To fill, hold the WISPR Vertically with the gas input valve upwards. Push the gas re-fill cylinder down onto the filling valve.  Stop filling when the gas spills from the valve and do not overfill.


2. Prepare the blend and Pack the Chamber: Remove the filling chamber from the WISPR. Next, place the grounded blend into the filling chamber. Do not over pack, otherwise the airflow will be impeded.


3. Insert the Filling Chamber: Once the filling chamber is packed, place it back into the WISPR.


4. WISPR Heat Activation: Press the On/Off switch downwards until you can hear gas flow to turn on the WISPR. (Mid Position) Next, activate the unit by slowly pushing the On/Off switch completely downward until it clicks. The sound of the gas flow changes to a mild “whisper” and an Orange Light becomes visible, confirming the WISPR is heating up.


5. Let the WISPR Heat Up: Allow at least 45 seconds for the WISPR to reach its controlled operational temperature before applying. For a denser Vapor, let the WISPR heat up for at least 3 minutes.


6. Using the WISPR: To enjoy the Vapors from the WISPR, simply place your lips around the mouthpiece and draw with slow steady breaths. Load the filling chamber again if desired.

Turn the Unit off and Put Away: When finished, turn the WISPR off by pushing the On/Off switch fully forwards. (No Red) Fold the straw back down into the body of the WISPR then place back inside the carrying case.