Evolve Maxxx 3 in 1 Kit by Wulf Mods

Using the Evolve Maxxx 3-in-1

3 Modes in 1

To use Dab Rig Mode first start by screwing in the coil into the base of the device. Then screw the airflow piece into the base and screw that onto the battery. Once that is built, attach the glass adapter. User tip: to get the best performance, make sure all of the connections on the unit have been cleaned prior to use.

Now you are going to want to remove the cap from the dual coil quartz or triple coil atomizer and place your concentrates directly into the chamber. After this fill your rig with the desired amount of water. Insert the battery into the adapter of the rig. Once activated, inhale from the mouthpiece. Press the carb once the rig is filled with vapor to release airflow.

To use Nectar Collector Mode, start by screwing the mouthpiece onto the top of the battery. On the other side of the device screw the base onto the battery and the nectar tip. An important note to remember is to make sure that the heating tip has fully cooled down before removing it. It can be extremely hot.

Once the heating tip has warmed up to the desired temperature, press the tip against the concentrate and gently inhale. Simple as that!

To use Wax Pen Mode, screw your desired coil into the base and attach the mouthpiece. Then you are going to screw the mouthpiece onto the battery. To begin your session, remove the cap from the dual coil quartz or triple coil quartz atomizer and place your concentrates into the chamber. Close it back up and you’re ready to go.

Once the battery has been assembled and loaded, power it on and select your desired temperature. Inhale and enjoy! The Evolve Maxxx 3-in-1 is compatible with both Evolve Plus and Regen Coils.