Herbs on the Go!
Delicious Savors Anytime, Anywhere
Powered by a rechargeable 18650 lithium-ion battery this device employs a singular button control; press it 5 times to turn it on as well as off. The square LED indicator glows white and the ceramic tube heating element warms up to reach your selected temperature in mere seconds.
After heating up, you’re ready to make contact with your extract then producing dense and flavorful vapor clouds. As a safety precaution, this device will automatically shut down after 60 seconds of use. Also included within the magnetic cover is a removable glass container called the HuniPot. This can be used to conveniently store and use your extracts. The included 14mm and EGO adapters act as the mouthpiece or can be attached to optional bubblers for water filtration.
How to Use
Using the HUNI Badger
First start off by pulling off the magnetic battery cover on the side of the HUNI Badger to install the 18650-battery matching the markings on the inside. Pull open the magnetic cap on the bottom of the device to see the mouthpiece stored within the same compartment as the HuniTip heating element. Slide open the dust cover on the top of the device to expose the threaded airway. Thread in the mouthpiece until snug and prepare your materials for use. Now you press the power button 5 times to turn on the device. To tell its on, the logo on the button will glow and the LED light turns on beginning to heat up immediately. The HUNI Badger reached operating temperature in roughly 10 seconds. Gently inhale through the mouthpiece while dabbing the HuniTip directly onto your extracts.
The Extra Steps
Make sure the device is completely turned off. The LED and power button light should both be turned off indicating the unit off. Unscrew the mouthpiece and shut the dust cover. Replace the mouthpiece and the HuniPot back within their compartments in the magnetic cap. Insert the HuniTip into the mouthpiece compartment and secure magnetic cap.