GotVape.com Top Rated Vaporizers on Sale Now!
The Atmos RX Vaporizer is a small and discreet Portable Vaporizer manufactured by Atmos Techology LLC out of Florida.
With features such as a rechargeable Lithium Ion battery providing up to 72 hours continuous use, a quality ceramic heating element, and an ultra rapid 5 second heat up time, the Atmos RX Vaporizer offers both portability and ease of use in one unit.
Utilizing a sleek and compact design concept comparable to a fountain pen, the Atmos RX Vaporizer measures 5 inches in Height and .5 inches in Diameter, conveniently fitting inside both your hand or pocket.
Keeping the customer in mind, the Atmos RX Vaporizer offers over 72 hours of continuous Vaporization per full charge. The Atmos RX Vaporizer reach's a maximum temperature of 400 Degrees F and a minimum temperature of 375 Degrees F in under 10 seconds. The Temperature level is dictated by the rate of the draw along with placement of the blend inside the heating chamber.
A 2 hour time period is needed for the Atmos RX Vaporizer to completely charge.
Currently the Atmos RX Vaporizer only works with dried blends, however there is an accessory that will be available in the near future (early summer 2012) that will allow the unit to work with both essential oils and concentrates.
The Atmos RX Vaporizer's ceramic heating chamber is one of the many unique features that make this unit a quality Vaporizer. Equipped with a hand-made ceramic core, the heating chamber provides even heating of your blend while containing the heat within the chamber.
This unique vaporizer also comes equipped with a unique two-part filtration system. The first line of defense from any degraded blend particles is the medical-grade stainless steel mesh filter. Second, is a unique ceramic filter that attaches to the mouthpiece.
The Atmos RX Vaporizer ceramic filter not only filters the air passing through the mesh filter, but it also cools the vapor for a smoother application.
The mouthpiece is made from environmentally friendly rubber. It is designed to give the user a pleasant experience, allowing an easy and comfortable draw with every use of the Atmos RX Vaporizer. The mouthpiece connects to the chamber connector, which houses the ceramic and mesh filters, and holds them in place.
The Atmos RX Vaporizer lithium ion battery is designed to provide long-lasting use on a single charge.
At the tip of the battery is a blue LED light with electroplate cover, which glows whenever you push the power button. The light also acts as an alert system, letting you know when your battery needs to be recharged.
Another feature accompanied with the Atmos RX Vaporizer is the built-in automatic shut off safety setting after 9 seconds of continuous heat.
To reactivate the temperature, simply wait 3 seconds then press the Power Button down for a couple of seconds to repeat the Vaporization process.
The Atmos RX Vaporizer operates in a few easy steps.
First, grind your blend.
Next, remove the Atmos RX Vaporizer chamber connector from the ceramic heating chamber in a counter clockwise motion.
Now, fill the ceramic heating chamber with your blend and screw the chamber connector back onto the ceramic heating chamber in a clockwise motion.
DO NOT OVER PACK
Activate the Atmos RX Vaporizer by pressing the power button for two seconds then begin taking slow steady breaths.
Each Atmos RX Vaporizer unit comes with a 3 year Warranty against manufacturing defects. The heater core and batteries are equipped with a 3 month Warranty. However, both parts are a consumable and will need to be replaced in the future according to the amount of use.
All the raw materials, and every piece of the Atmos RX Vaporizer is 100% sourced and manufactured in the United States, making this unit a fully American product!
The sequence of blinking you mention is not a typical function for the Atmos RX Vaporizer. If you remove the heating chamber from the Atmos RX Vaporizer and press the power button on the battery and achieve a blue light, your battery is functioning properly.
If when you attach the heating chamber to the Atmos RX Vaporizer and press the power button and it blinks in the sequence you mention, there may be an issue with your heating chamber.
In this case, you will want to contact Customer Service at: 888.827.3101, Monday through Friday, from 9 a.m. to 6 p.m. PST for further assistance with Atmos RX Vaporizer troubleshooting.
The Atmos RX Vaporizer will need to be fully charged before the first use, which can take up to 6 hours. After the first charge, however, the pen can be fully charged in around 2 hours. When the battery is low, the battery light indicator will blink several times when pressing and holding the power button.
The Atmos RX Vaporizer screen or mouthpiece may need to be cleaned. If this does not help, there may be an issue with your vaporizer. Please contact Customer Service at: 888.827.3101, Monday through Friday from 9 a.m. to 6 p.m. PST for further troubleshooting assistance.
First, remove both the Chamber Connector and Mouthpiece from the Ceramic Heating Chamber. Pre-Heat the Atmos Raw Vaporizer by holding down the Power Button for 9 seconds or until the Blue Indication Light turns off on the bottom of the Battery.
Next, Grind your blend and You want to place your blend on top of the mesh flavor screen located on the top part of the Ceramic Heating Chamber. Screw the Chamber Connector/Mouthpiece back onto the Ceramic Heating Chamber.
The Atmos Raw Vaporizer is now ready for use, hold the Power Button down for 2 seconds then start taking slow steady breaths for 7 seconds. Release the Power Button for 3 seconds then Repeat as desired.
We customize the Atmos Raw Vaporizer Flavor Screens with the Vapir NO2 Vaporizer Screen Set.
You can purchase the flavor screens in either a 4pk or 20pk, just give our sales department a call at (888) 827-3101 so we can facilitate your order.
Your Atmos RX Vaporizer's charger may need to be replaced. Have you made sure to unlock the vaporizer for use? If so, and your Atmos RX Vaporizer is still not functioning properly, please contact Customer Service at: 888.827.3101, Monday through Friday, from 9 a.m. to 6 p.m. PST for further troubleshooting. If we cannot get your Atmos RX Vaporizer working properly, we can see about issuing you a Return Merchandise Authorization to send it in for warranty service.
If your Atmos RX Vaporizer is blinking when the attachment is connected to your battery, your heating chamber may be experiencing an issue. Contact Customer Service at: 888.827.3101, Monday through Friday, from 9 a.m. to 6 p.m. PST for assistance with troubleshooting. If we cannot get your Atmos RX Vaporizer to function properly for you, we may be able to issue you an RMA, Return Merchandise Authorization, if your vaporizer is still under warranty.
You may have an issue with your Atmos RX Vaporizer. Contact Customer Service at: 888.827.3101, Monday through Friday, from 9 a.m. to 6 p.m. PST for troubleshooting assistance. If they cannot get your Atmos RX Vaporizer to function properly, they will issue you an RMA, Return Merchandise Authorization, to send your unit in for warranty service.
We recommend using the flavor screen to keep your dried blend elevated slightly above the heating element.
Place your blend inside and let your Atmos Raw Vaporizer pre-heat for five seconds.
Now, engage the power button and begin taking slow, steady draws.
Both the Vapir NO2 Vaporizer and the Atmos Raw Vaporizer are quality Portable Vaporizers. The Atmos Raw Vaporizer is equipped with a more discreet design (5' L x .5 W) and a quick heat up time of only 5-7 seconds. Both have lithium ion batteries, however the battery life of the Atmos Raw Vaporizer is up to 72 hours.
The Vapir NO2 Vaporizer features a digital display, but you can fluctuate the temperature of the Atmos Raw Vaporizer from 375-400 Degrees F with your rate of draw and placement of the vapor screen inside the heating chamber. However, every Vaporizer Patron is different and you must factor in your specific lifestyle to see which Vaporizer works best for you.
Yes, the Atmos Raw Vaporizer is designed to produce a visible Vapor.
For optimal results, we recommend filling your blend inside the Atmos Raw Heating Chamber and press down on the power button for 5-9 seconds to pre-heat your blend.
Release the power button for two seconds, then press it down for 9 seconds while taking slow and steady breathes to enjoy your Vapor.
It sounds as if you may be having an issue with the heating chamber portion of your Atmos RX Vaporizer. Contact Customer Service at: 888.827.3101, Monday through Friday, from 9 a.m. to 6 p.m. PST for troubleshooting assistance. If we cannot get your Atmos RX Vaporizer to function properly, then we will issue an RMA, Return Merchandise Authorization, to send it in for warranty service.
Your Atmos RX Vaporizer may be locked. Try pressing the power button three times in a row rapidly to unlock your Atmos RX Vaporizer. If you are still not getting any light activity or any vapor, call Customer Service for further assistance at: 888.827.3101, Monday through Friday from 9 a.m. to 6 p.m. PST.