How To Clean A Puffco Accessory (Step-By-Step Guide)

Puffco Accessories are one of the most fun and satisfying ways to augment your favorite vaporizer. But with great power, comes great responsibility and that means you'll have to keep your Puffco Accessory clean for the best results. 

Luckily Got Vape is here today to explain just that, with this guide breaking down how to properly clean your Puffco Accessories and ensure that your sessions stay ripping at 100%. 

Follow along as Got Vape shows you that you don't need complicated tricks to keep your vapor tasting pure, but instead just a little bit of expert information to show you the right way forward.

This step by step Puffco accessory cleaning guide walks you through the process from start to finish, imparting all of our wisdom and giving you helpful tips that can turn your sessions from zero to hero in no time.

Table of Contents:

Puffco Cleaning Quick Start Guide
1. Identify Your Puffco Accessory Material
2. Safely Remove Your Top Or Accessory
3. The Warm Post Session Spot Clean
4. Deep Clean & Isopropyl Soak
5. Clean The Silicone & Travel Gear
6. Rinse And Air Dry Completely
7. Reassemble And Store Properly
Got Vape Crew Tips
Easy Puffco Accessory Maintenance

Puffco Cleaning Quick Start Guide

Ready to freshen up your rig? Here is a fast breakdown covering the essential steps to cleaning your Puffco accessories safely and smoothly:

1. Identify Your Puffco Accessory Material

First things first, if you want to clean a Puffco Accessory, you’ll have to make sure you use the right cleaning method for the specific material that your component is made out of .

Because Puffco's ecosystem includes delicate 3D chambers, artisan glass tops, and flexible silicone travel packs, every type of attachment is going to have its own set of particularities for safe maintenance.

Got Vape Crew Material Tips:

• Glass Tops: Borosilicate glass thrives in high percentage isopropyl alcohol. It can be fully submerged and soaked safely to remove stains. 
• 3D Chambers & Cores: These contain ceramic heating elements and gold connection pins. They can be soaked in ISO, but must be completely cooled down first to avoid thermal shock.
• Silicone (Travel Packs, Tethers): Silicone is durable but porous. Avoid soaking silicone in ISO for long periods, as it can cause the material to swell or degrade. Stick to quick wipes or warm soapy water.

While one of the easiest steps to maintaining your setup, identifying the material is a non-negotiable that you cannot avoid. Always double check what you are cleaning before dunking to avoid any accidents or unforced mishaps. 

2. Safely Remove Your Top Or Accessory

To get started cleaning, you'll first have to remove your Puffco Accessory from your main vaporizer unit. Make sure to take your time, as sometimes the accessories can get sticky when they haven't been cleaned in a while. 

Most Puffco Accessories use the silicone seal to slip onto your existing Puffco vaporizers, so slowly twist / pry the two pieces apart while maintaining a firm grip on both for the safest removal. 

The Prep for the Job:

• Always ensure your Puffco device is completely powered off before removing any glass tops, 3D chambers, or modular cores.
• For glass tops, gently tilt the glass backward to break the silicone seal, then lift it straight up and away from the base.
• For chambers or Proxy cores, use a gentle twisting motion to unthread or pop them out without forcing the delicate gold connection pins.

Having your accessory safely removed makes the deep cleaning process completely hassle free, letting you focus on clearing out the reclaim without risking damage to your expensive battery base.

Once your accessory is removed, place them carefully on a towel or soft cloth to avoid any rolling or accidental drops. This will keep everything safe and in one place for easier overall cleaning as well. 

3. The Warm Post Session Spot Clean

One of the most important cleaning cleaning steps lies with quick, post session spot clean to remove any concentrate leftovers while they are still warm and easily removed from your Puffco Accessory. 

The best way to do so, is to take a look over your Puffco Accessory once your session is over and see if there's any sticky parts or left over concentrates that can be easily seen. 

Removing these now helps preserve the power of your Puffco Accessory and will make the subsequent deep cleaning steps far easier to accomplish later on. 

Post-Session Cleaning Checklist:

• While the chamber is still warm from the hit, wipe it thoroughly with a dry cotton swab to soak up leftover liquid wax.
• Wipe the bottom air holes of the glass joint to ensure reclaim doesn't get glued to the silicone base as it cools.
• A quick wipe after every single session keeps your Puffco accessories looking brand new and prevents the transfer of old, stale oil into your next fresh dab.

There’s nothing worse than coming back ready to dab only to find a sticky, chazzed rig staring back at you. It ruins sessions and leads to a waste of flavor, so avoid all this by wiping down properly once done with your Puffco Accessory.

4. Deep Clean & Isopropyl Soak

Going hand in hand with post hit wiping is routine deep cleaning of your Puffco accessories. This allows you to give your favorite accessories a complete refresh and clean up even the dirtiest of accessories out there. 

Proper Soaking Technique:

• For Glass Tops: Place the glass inside a sealable plastic bag or container filled with isopropyl alcohol. Let it soak for 30 - 60 minutes to dissolve sticky reclaim naturally.
• For 3D Chambers: Ensure the chamber is 100% cooled to room temperature. Drop the entire chamber into a small shot glass of ISO for 20 minutes and use a swab to clean after.
• Never Scrape: Avoid using metal dab tools to scrape the ceramic walls of the chamber. Let the alcohol do the heavy lifting to avoid permanent scratches.

Isopropyl baths are one of the most effective and reliable methods of cleaning your Puffco Accessories, providing you with the perfect solution to eliminating tough stains and other annoyances during your sessions. 

5. Clean The Silicone & Travel Gear

Travel packs, ball cap tethers, and silicone Proxy pipes need love too, but they require a softer touch than glass and ceramic. This means that you should avoid isopropyl alcohol soaks and instead use dampened swabs to spot clean. 

To clean silicone accessories, use a cotton swab lightly dampened with ISO for a quick spot clean, wiping away the sticky residue immediately and acting with greater precision for more effective cleaning. 

For a deeper clean, wash the silicone parts in warm, soapy water and scrub gently. This keeps your travel gear smooth, sticky free, and comfortable to grip without degrading the material.

If you have trouble getting rid of any sticky parts, try giving it a couple passes in order to gradually break down the concentrate and then make their eventual removal possible. 

6. Rinse And Air Dry Completely

With your accessories cleared of reclaim, you must ensure they are properly rinsed and dried. Firing a vaporizer that still has liquid in the connections is a recipe for a short circuit.

Drying Steps:

• Rinse glass tops thoroughly with warm running tap water to flush out any remaining alcohol.
• Do NOT rinse 3D chambers with water! Simply remove them from the ISO bath and let the alcohol evaporate on its own.
• Set all components on a paper towel in a well-ventilated area and let them air-dry completely (usually 30 to 60 minutes) before reassembly.

Never attempt to use your Puffco Accessory while any moisture or isopropyl alcohol remains, as this can cause issues with vaporization and end up wasting your concentrates in the process. 

So always make sure to let all of your components air dry completely after cleaning your Puffco Accessory for the best results going forward. 

7. Reassemble And Store Properly

Lastly, you need to store and reassemble your Puffco gear properly to protect your expensive glass tops and prevent accidental drops.

When you're finished cleaning:

• Thread the chamber back in carefully, ensuring it is snug but not over tightened.
• Slot the glass top back in by aligning the air intake hole with the base, pushing down the front, and rocking it backward to seal.
• Perform a quick, unheated dry pull to ensure the airflow feels restricted and airtight before loading your next dab.

With everything done, don't rush the final steps. Always make sure to reattach your Puffco Accessories carefully, this way you can get back to seshing just like you were before, all with the bonus of a refreshed clean attachment. 

Got Vape Crew Tips

Here are a few of our favorite Got Vape Crew Tips after more than two decades working with dabbing accessories.

• Keep a stash of Puffco Dual Tools or cotton swabs and isopropyl alcohol close to your station.
• Never force a glass top into the base if it feels stuck; use a tiny drop of water on the silicone seal for gentle lubrication.
• Always align the air holes perfectly before applying any pressure to prevent tearing the silicone base.
• Consistency is key: a quick daily swab saves you from having to do a massive, hour-long deep clean later on.

By sticking with these general pointers, you'll be able to avoid many of the common pitfalls associated with cleaning your accessory and ensure you can keep things clean with ease. 

Easy Puffco Accessory Maintenance

At the end of the day, cleaning and maintaining a Puffco accessory isn’t really that complicated. With the right material knowledge, a gentle removal technique, proper ISO soaking, and a commitment to drying, you'll enjoy smooth, flavorful sessions every time without fail.

This leaves you free to enjoy your concentrates to their sticky icky fullest, without tasting burnt coils or dealing with clogged glass. Rip your clouds when you want, how you want, and where you want, only with the pristine power of a perfectly clean Puffco rig.

Have any more questions? The Got Vape Resource Center is ready to help with more step-by-step guides just like this. Thanks for stopping in with the Got Vape Crew and rip some dabs out there! Arooo!!!