X-Ray Hot Knives
See through your battery and cut through your concentrates with the Wulf Mods X-Ray Series Kodo Knife Kit! These highly versatile sets provide both a high quality ceramic hot knife experience and a fully functional 510 battery for convenient cartridge vaping.
For seamless loading the Wulf X-Ray Kodo Hot Knife features a custom ceramic hot knife tip (with protective cap included), fast heating with a choice of 3 voltage levels (2.5v, 3.0v, 3.5v), and a long lasting 400mAh battery with 10s pre-heat. This gives you a wide range of options to accommodate concentrates of different types, ensuring your hot knife works perfectly.
On the flip side of things, the Wulf X-Ray Kodo Kit also works as a 510 battery thanks to the threaded removable ceramic tip. This allows you to enjoy cartridges of any and all sizes, offering the ultimate one two punch for your sessions.
Living up to its namesake the Wulf X-Ray Kodo Kit has a distinctive see-through “X-Ray” body style, letting you see the inner workings of your battery as you vape. Take a look through the 5 dripped out x-ray color choices and unleash your sessions with the Wulf X-Ray Series Kodo Knife Kit today.
How To Use A Wulf X-Ray Kodo Hot Knife
To use a Wulf X-Ray Kodo Hot Knife, follow the quick steps laid out below.
- Power on your Wulf X-Ray Kodo Hot Knife by pressing the power button five times (5x).
- Scoop up a small bit of concentrate with your ceramic knife tip (size of grain of rice).
- Hold the power button to warm your knife tip and drop melted concentrates into your banger banger / atomizer.
- Wipe down the tip of your hot knife to remove any leftover concentrates.
- Enjoy your dab!
In just a few seconds you can losslessly load all of your concentrates for dabbing, helping you avoid the scrapping and stickiness that can pop up with standard metal tools. Always take your time and you’ll enjoy easy loading without issue.
How To Load A Cartridge Onto A Wulf X-Ray Kodo Hot Knife
To load a cartridge onto the Wulf X-Ray Kodo Hot Knife you must first remove the ceramic tip and place it somewhere safe. Now you can choose a 510 cartridge (any size) and gently twist it into the connection on top of your battery.
Aim for a snug connection without over tightening. Once you’ve attached the cartridge, you can move onto the next steps.
How To Use The Wulf X-Ray Kodo Hot Knife With A Cartridge
Once you’ve attached a cartridge to your Wulf X-Ray Kodo Hot Knife it behaves exactly the same as a normal 510 battery. This means easy on-demand clouds and simple single button operation.
To get started vaping a cartridge with your Wulf X-Ray Kodo Hot Knife Kit, press the power button five times (5x) in a row. This will cause all three of your LED lights to flash GREEN three times (3x) and turn your battery on.
Hold down the power button and draw from the mouthpiece of your cartridge to enjoy a steady stream of on-demand vapor. Once you're done, just release the power button and your battery will return to standby mode.
After your session is complete, prepare your Wulf X-Ray Kodo Hot Knife Kit for storage / travel by pressing the power button five times (5x) to switch off the battery. This will cause your LED lights to flash GREEN three times (3x) before completely powering down.
Voltage Adjustment On A Wulf X-Ray Kodo Hot Knife
To adjust the voltage level on your Wulf X-Ray Kodo Hot Knife press the power button 3x in a row. This will cycle through to the next voltage level in line and update the LED light indicators on the body of your battery.
The Wulf X-Ray Kodo Hot Knife uses the following coding:
- One Light - 2.5v
- Two Lights - 3.0v
- Three Lights - 3.5v
Use this guide while swapping through your voltage levels to easily tell which setting your Wulf X-Ray Kodo Hot Knife is currently at. In general lower voltages are better for flavor and higher voltages produce stronger potency. Higher voltage levels are also better for thicker concentrates, allowing you to heat them like normal without having to wait longer.
How To Activate Pre-Heat Mode On A Wulf X-Ray Kodo Hot Knife
To activate the pre-heat mode on a Wulf X-Ray Kodo Hot Knife press the power button two times (2x) to begin the 10s countdown. After the 10s has completed, you can use your battery as normal for a boosted hit with increased potency and cloud volume.
How to Charge The Wulf X-Ray Kodo Hot Knife
To charge the Wulf X-Ray Kodo Hot Knife use the USB-C port located on the bottom of the battery. The first time you charge your Wulf X-Ray Kodo Hot Knife, leave it plugged in for two full hours. Everytime after that, never leave it plugged in charging for longer than 1 hour.
When you plug your Wulf X-Ray Kodo Hot Knife into a charging cable the LED lights will begin to flash to show you current battery level. Once your battery has reached 100%, make sure to unplug it immediately.
Troubleshooting The Wulf X-Ray Kodo Hot Knife
The Wulf X-Ray Kodo Hot Knife has several troubleshooting warnings in order to protect you and your battery during sessions. They are as follows:
-
Power Button Warning: If the power button is held for longer than 15s, all three LED lights will flash eight times (8x). To proceed, release the power button and press it once more to reset the timer.
-
No Cartridge Warning: If you haven’t attached a cartridge, three LED lights will flash five times (5x) to remind you to attach it.
-
Circuit Warning: Three lights will flash three times (3x) to indicate a short circuit and your device will stop working. Stop vaping until this warning subsides.
-
Low Battery Warning: When your battery is low on battery, all three lights will flash ten times (10x) and the battery will power off. This means you need to recharge.
If you ever encounter these warnings, make sure to address them immediately in order to protect your battery and ensure your vapor is at 100% effectiveness.
How to Clean The Wulf X-Ray Kodo Hot Knife
The Wulf X-Ray Kodo Hot Knife needs to be clean in order to get the best use out of both the hot knife and 510 battery capabilities. To clean your Wulf X-Ray Kodo Hot Knife take a look at the steps below:
- Power down your battery.
- Remove the ceramic tip / 510 threaded cartridge.
- Dampen a q-tip with isopropyl alcohol.
- Clean your ceramic tip, threaded connections, and travel cap.
- Let everything dry.
- Continue using your kit.
With proper cleaning you can ensure your battery works as long as possible, guaranteeing you get the most out of your investment and enjoy top tier clouds with ease.
What’s Included:
- (1) Wulf Mods X-Ray Series Kodo Knife Kit
WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge the battery. Failure to follow these instructions could result in battery damage and frying of the internal system.
WARNING: This product can expose you to chemicals including nicotine, which is known to the State of California to cause cancer. For more information, go to 
