RECON in Action
Change up your sessions with the Wulf Mods Recon 510 Thread Battery. Designed as a lowkey disposable device, the Recon is actually for oil cartridges! This new device features an LED display for viewing your battery and voltage settings. The Recon is able to fit 2-gram cartridges and features three variable voltage settings (2.8V-Green, 3.4V-Blue, and 3.8V-Red). Additionally, the Recon is powered by a 650mAh battery and includes a USB-C cable for the fast charging capabilities. The Recon is available in nine colors, including White-Red Spatter and Full Color.
Getting Started:
To turn on/off the Recon, press the power button below 5X. If you want to change the voltage settings, press the button or inhale through the mouthpiece thrice. The LED lights change colors depending on the voltage. To start its preheating mode, inhale or press the bottom button twice, and if you’d like to end the preheat cycle, press the button once.
How to Load Your Cartridge:
In order to start loading cartridges, first, remove the mouthpiece from the cartridge. Then, load the desired amount of oil you desire. Next, screw the cartridge onto the bottom of the device. After, connect the bottom part of the device to the top, and its lights will flash once it is connected successfully.
How to Charge:
On your first charge, make sure to charge the device for a full two hours. After its first charge, do not charge it for more than an hour as this will ruin the device’s lifespan. While charging, the LED lights stay on: red means it is still charging and green means it is fully charged.
Understanding Troubleshoot Issues:
Light indicators will flash to let you know the problem when your device is acting up. For example, a white light will flash three times, if there is no cartridge detected. Another example is when the Recon shows a red light, the battery is lower than 3.2V. See user manual for more information on troubleshooting.
What’s Included:
- (1) Wulf RECON
- (1) USB -C Cable
- (1) User Manual
WARNING:Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge or use any other charging cable other than what comes with your battery. Failure to follow these instructions could result in battery damage and frying of the internal system.
